Index Dip Buyer
Finds sharp, short pullbacks in stock indices that are already in a long-term uptrend, on the daily chart. It marks the signal, shows the stop, tracks the trade day by day and tells you when to exit, so a signal takes a minute or two to act on.
Published on TradingView. Subscriptions open at launch.
Backtested results are hypothetical and include spreads but not overnight financing. Past performance is not a reliable indicator of future results. See the Risk Warning.

Small, steady wins without the Sunday prep
Stock indices spend most of their time going up, but rarely in a straight line. Every few weeks there’s a sharp, short pullback, and those pullbacks inside an uptrend have tended to bounce. I used to trade them the hard way: every Sunday going through each index with several indicators, every morning checking again, and working out the stop and exit by hand. So I turned the rules into one script. Now there’s no Sunday prep and no morning check-ins. I set alerts and only look when one fires.
A good fit if you
- Want a simple routine: set alerts, check in when one fires, act if there’s a signal, and get on with the day.
- Have a job, a business or a family and can’t watch the market all day.
- Prefer a high win rate with small, steady wins, and understand that losses are larger than the average win.
- Trade stock index CFDs or futures and want fixed rules, with the stop shown before you enter.
Not a good fit if you
- Want big runners. Wins are usually small, around half the risk, and the system relies on winning often.
- Aren’t comfortable holding overnight and over weekends. Trades last about four days on average, and gaps happen.
- Want guaranteed results or signals to follow blindly. It’s a tool to support your own decisions.
Three simple checks at the daily close
The script checks each daily candle once it has closed. A signal only counts at the close and never repaints. While the candle is still forming, a yellow “forming” tag shows the live RSI, and that’s the only live part.
Above the 200-day average
The daily close is above the 200-day simple moving average. The script only marks dips in markets that are already rising.
RSI(2) closes below 10
That only happens after a sharp, short pullback, usually two or three down days in a row.
At the signal close
The entry is the close of the signal candle, marked with a diamond and the RSI value under it.

A fixed stop, and out on the bounce
2 × ATR below entry
Set from the 14-day ATR and checked against the daily lows. It’s fixed for the life of the trade.
First close above the 10-day
The first daily close above the 10-day simple moving average. That’s usually the bounce the trade is waiting for.
Day 10
If neither has happened, the trade closes at the close of day 10.

Why the 10-day average and not a fixed target
The idea is to catch the snap-back after a dip, not to hold for a new trend. In testing, the close above the 10-day average beat the other exits tried (a 5-day average, RSI above 70 and a close above the previous high). It gets out once the bounce has happened, before the next pullback. Waiting for the daily close also did slightly better than exiting as soon as price crossed the average during the day.
How trades ended in the backtest
Set the alerts once, then only look when one fires
Add it to a daily chart
Once you subscribe, the indicator appears under Indicators → Invite-only scripts on TradingView. Add it to the daily chart of one of the seven tested indices: US30, NAS100, SPX500, DE30, JP225, EU50 or HK33. On other timeframes the panel reminds you to switch.
Set your risk per trade
Open the settings and set your risk per trade at the top: the account % figures on the chart use it. The rule settings default to the tested values.
Create the alerts
There are three alert conditions: “Dip signal”, “Exit level – close above 10-day avg” and “Dip exit – day 10”. Create one for each on every index you follow, with the trigger set to Once per bar close. Alerts need a paid TradingView plan.

The settings, explained
| Setting | What it does |
|---|---|
| Your risk per trade (%) | Used for the account % figures shown on the chart and in the panel. |
| Rule settings | RSI length and signal level, the 200-day trend length, the 10-day exit length, the ATR stop multiple and the maximum days in a trade. The defaults are the tested values. |
| Display | Past signals, RSI tags, name tags on the averages, colours, how long a finished trade stays on the chart, and where the boxes sit. |
| Info panel | On or off, position and text size. |
| Optional extras | Support and resistance zones from daily swings (context only, not part of the rules), and Idea mode, which adds explanation callouts to the latest trade for sharing charts. |

See the indicator on TradingView
Read the full description, look through the example charts, and boost it or follow CheckInTrader to hear when subscriptions open.
The signal, the stop and the exit, all on one chart
| You see | What it means |
|---|---|
| Orange line | The 200-day average, the uptrend filter. |
| Blue line | The 10-day average, the exit level. |
| Diamond with a number | A dip signal and its RSI(2) value. A yellow “forming” tag means the candle hasn’t closed yet. |
| Green and red dots | Past signals that won and lost, so you can see how the rules have behaved on that chart. |
| Entry and stop lines | Shown while a trade is running. |
| Exit tags | Teal for an exit at the 10-day average or day 10, red for a stop, with a dashed line from entry to exit. |
The info panel
- Status: no signal, watch (RSI getting close), a dip signal, in a trade with the day count, or “EXIT LEVEL REACHED” on exit day.
- RSI(2) and the 200-day: the current RSI and how far price is above or below the 200-day average.
- 10-day average: the current exit level.
- ATR and stop distance: in points.
- History on this chart: past trades, win rate and average R, worked out live from the history loaded on your chart.

Check after the close, act in a minute or two
After the daily close, check for a signal
If there is one, enter and place the stop 2 × ATR below the entry. Size the position so a stop-out costs a small, fixed percentage of your account.
Each day, check the close
If the daily close is above the 10-day average, exit. The panel shows “EXIT LEVEL REACHED” and the exit alert fires.
Day 10 at the latest
If the trade hasn’t exited or been stopped, close it at the close of day 10.
When several indices signal at once
Stock indices move together, so dips often show up on several on the same day. Each extra position adds to the same bet. Many traders cap how many dip trades they hold at once, or reduce the size per trade when several signal together. Each chart already shows its own signal, stop and exit, so you can go through them quickly.
If you miss the close
Signals confirm at the daily close, which may be late at night or early morning where you live. In testing, entering at the next day’s open with the same stop still worked, at about +0.12R a trade against +0.15R at the close. If price has already bounced well away from the signal close, it’s often better to skip it.
Not every dip bounces
Losses happen, and they’re bigger than the average win. In sharp sell-offs a trade can hit its stop, and once price falls below the 200-day the script stops marking new dips until the uptrend returns.

One routine, four indicators
The Dip Buyer focuses on stock indices on the daily chart. The other CheckInTrader indicators cover different markets and timeframes and behave differently, so you can run them side by side: one set of alerts, one check-in when something fires.
Index Dip Buyer
Their bad months rarely line up
Losing months still happen: combined, Breakout, Dip and Metals were down in 10 of these 24 months. The point is that one strategy’s bad month is usually softened by the others.
Running more than one
- Use the same risk per trade on each, so 1R means the same amount whichever indicator the trade came from.
- Watch for overlap. The Breakout also trades US30, NAS100 and DE30 on the 4-hour chart. If both are in a trade on the same index, that’s double the exposure to one market.
- Decide your total open risk in advance, so a busy week doesn’t leave more of your account at risk than you’re comfortable with.
Backtested results. Past performance is not a reliable indicator of future results.
The full numbers, bad years included
Taking every signal across the 7 indices, OANDA daily data, the backtest averaged about +8.7R a year from 2005 to 2025 (median +8.5R), and about +5.6R a year since 2019. There were four losing years: 2008, 2018, 2020 and 2022, the worst being 2018 at about −18R. The largest peak-to-trough drawdown was about 30R. Because the indices often signal on the same days, several trades can lose together, so drawdowns come in clusters.
| Trade by trade (2005–2026) | Result |
|---|---|
| Trades | About 61 a year, roughly 5 a month |
| Win rate | About 70% |
| Average per trade | +0.15R (+0.10R since 2019) |
| Average win / loss | About +0.6R / −1.0R |
| Best / worst trade | +2.2R / −2.3R (a gap through the stop) |
| Longest winning / losing run | 16 / 12 trades |
At 1% risk per trade, 1R is 1% of your account, so the average year of about +8.7R would have been roughly +8.7% before compounding, and the largest drawdown roughly 30%. The figures include spreads but not overnight financing; on typical index CFD financing (about 5–7% a year on longs) the average fell to about +6.3R a year (+3.3R since 2019). Results have been weaker recently: strong, steady bull markets suit it best, and sharp sell-offs hurt it most. These are backtest figures, not a forecast, and live results are likely to be lower because of costs, missed trades and slippage.
Indices tested: US30, NAS100, SPX500, DE30 (Germany 40), JP225, EU50 and HK33. On other markets the signals still show, but the rules weren’t designed for them, and the panel’s “History on this chart” row is the best guide.
Backtested on OANDA data. Hypothetical results have many limitations, explained in our Risk Warning. Past performance is not a reliable indicator of future results.
Dip Buyer questions
Does it repaint?
No. Signals are confirmed at the daily close and don’t change afterwards. The yellow “forming” tag on the current candle is the only live part.
Does it take short trades?
No. It only buys dips in indices that are above their 200-day average. When price is below it, the script waits for the uptrend to return.
Can I use it on other timeframes or markets?
The rules were designed and tested on daily candles of seven stock indices. On other timeframes the panel reminds you to switch. On other markets the signals still show, but the rules weren’t designed for them.
Why can a loss be bigger than 1R?
Trades are held overnight and over weekends, and price can open beyond the stop. The worst trade in the backtest was −2.3R. See the Risk Warning on gaps, news and the daily rollover.
Why does the panel’s history differ from the figures on this page?
The panel uses only the candles loaded on your chart and your broker’s prices. The backtest used OANDA data, where daily candles close at 5pm New York time, so results match best on a similar feed.
Which TradingView plan do I need?
Alerts on indicators need a paid TradingView plan. You’ll want three alerts for each index you follow: the signal and the two exits.
Does it know about economic news?
No. Central bank decisions and major data releases can move indices sharply, so check the economic calendar before you enter.
Should I practise first?
Yes. Follow the alerts on a paper trading or demo account first, so you get used to the rules and the exit routine. Our Risk Warning has practical tips.
Check in when an index dips, not every morning
The Index Dip Buyer is available at launch. Join the list to hear the moment it’s live.
General information only, not financial advice. Trading leveraged products carries a high risk of loss.